White Industries Headset Top Caps are machined from 6061-T6 aluminum here in our shop and machine engraved after anodizing. These are the same caps that are included with our headsets, just available separately in case you want to change things up or add a little zing to your steed.
To help with the Earth’s headset star nut overpopulation crisis, we have begun to sell these separately from our headsets.
Stylish, durable, and easily serviceable. Those were the goals when designing our headsets. We machine engrave our logos for a classy look, use durable and easily replaceable Enduro stainless steel angular contact bearings, and use a “split” crown race design that you can install and remove by hand.
The EC34|EC34 style is often referred to simply as an “1-⅛” headset which, most of the time, is enough of a description to get you the correct headset. But nowadays with all the different headset standards available we needed to get specific so check the SHIS specs below. SHIS? Yep, that’s the “Standardized Headset Identification System” used to verify compatibility.
Stylish, durable, and easily serviceable. Those were the goals when designing our headsets. We machine engrave our logos for a classy look, use durable and easily replaceable Enduro stainless steel angular contact bearings, and use a “split” crown race design that you can install and remove by hand.</P
The EC34│EC37 headset is designed to fit frames with tapered 34mm top/37mm bottom head tubes and can accommodate straight and tapered fork steerers with the appropriate crown race. But nowadays with all the different headset standards available we needed to get specific so check the SHIS specs below. SHIS? Yep, that’s the “Standardized Headset Identification System” used to verify compatibility.
Stylish, durable, and easily serviceable. Those were the goals when designing our headsets. We machine engrave our logos for a classy look, use durable and easily replaceable Enduro stainless steel angular contact bearings, and use a “split” crown race design that you can install and remove by hand.
The EC37│EC37 headset is designed to fit frames with straight 37mm head tubes and can accommodate straight and tapered fork steerers with the appropriate crown race. But nowadays with all the different headset standards available we needed to get specific so check the SHIS specs below. SHIS? Yep, that’s the “Standardized Headset Identification System” used to verify compatibility.
White Industries headsets include one crown race so you don’t need to buy one here unless you lost yours or want to use a different fork with your White Industries headset. Our crown races are designed with a “split” to allow for tool-free installation and removal. Check out the chart below to see which crown race you need for your headset and fork combination.
These lockrings fasten our TSR 1x and VBC 2x chainrings to our crank arms. There are two different versions, one for our MR30 cranks, and one for our ENO/Square Taper Road Cranks.
Stylish, durable, and easily serviceable. Those were the goals when designing our headsets. We machine engrave our logos for a classy look, use durable and easily replaceable Enduro stainless steel angular contact bearings, and use a “split” crown race design that you can install and remove by hand.
The ZS44│EC44 headset is designed to fit frames with 44mm head tubes and can accommodate straight and tapered fork steerers with the appropriate crown race. But nowadays with all the different headset standards available we needed to get specific so check the SHIS specs below. SHIS? Yep, that’s the “Standardized Headset Identification System” used to verify compatibility.
Stylish, durable, and easily serviceable. Those were the goals when designing our headsets. We machine engrave our logos for a classy look, use durable and easily replaceable Enduro stainless steel angular contact bearings, and use a “split” crown race design that you can install and remove by hand.
The ZS44│ZS44 headset is designed to fit frames with 44mm head tubes and straight 1-⅛” (28.6mm) fork steerers. But nowadays with all the different headset standards available we needed to get specific so check the SHIS specs below. SHIS? Yep, that’s the “Standardized Headset Identification System” used to verify compatibility.
Stylish, durable, and easily serviceable. Those were the goals when designing our headsets. We machine engrave our logos for a classy look, use durable and easily replaceable Enduro stainless steel angular contact bearings, and use a “split” crown race design that you can install and remove by hand.
The IS41│IS41 headset is designed to fit frames with integrated 41mm head tubes and works with straight 1-⅛” (28.6mm) fork steerers. But nowadays with all the different headset standards available we needed to get specific so check the SHIS specs below. SHIS? Yep, that’s the “Standardized Headset Identification System” used to verify compatibility.
Stylish, durable, and easily serviceable. Those were the goals when designing our headsets. We machine engrave our logos for a classy look, use durable and easily replaceable Enduro stainless steel angular contact bearings, and use a “split” crown race design that you can install and remove by hand.
The IS42│IS42 headset is designed to fit frames with integrated 42mm head tubes and works with straight 1-⅛” (28.6mm) fork steerers. But nowadays with all the different headset standards available we needed to get specific so check the SHIS specs below. SHIS? Yep, that’s the “Standardized Headset Identification System” used to verify compatibility.
