ENO
Our ENO line of components are renown for quality, durability and innovation in the single speed market place. From our freewheels, to our cranks, to our hubs listed below, our ENO line offers unique solutions for adapting your multi-gear bikes to a single gear cycle. The hub choices below offer those of you looking to convert a frame with vertical dropouts, a choice of eccentric hubs. For those of you with horizontal drops or eccentric bottom brackets, the standard ENO would be the logical choice for you.
SPECS
ENO front
Shell: 6061 aluminum
Axle: 15mm aluminum/bolt-on
Bearings: two 6902-2rs
O.L.D.: 100mm
Weight: 260 grams
Finish: polished silver or black anodized
Spoke Hole Drilling:28h, 32h, 36h
US MSRP Silver: $169 Black: $174
Standard ENO
Shell: 6061 aluminum
Shell type: disc/ freewheel, freewheel only, or fixed/free
Freeewheel Thread: (1.37x24 tpi)
Axle: aluminum bolt-on or QR Standard for horizontal drops
Bearings: two: 6902-2rs
O.L.D.: 126mm, 130mm, 135mm *disc only available in 135mm
Weight:
- 261 grams (135mm spacing non disc)
- 325 grams (135mm spacing disc)
Finish: polished silver or black anodized
Spoke Hole Drilling: 28h, 32h, 36h
US MSRP Silver: $169 Black: $174 (Std ENO) Standard ENO stock as freewheel only shell - flip/flop shell upon request
US MSRP Silver: $190 Black: $195 (Disc ENO)
Eric's Eccentric ENO
Shell: 6061 aluminum
Shell type: disc/ freewheel, fixed/free, or freewheel only
Freewheel thread: (1.37x24 tpi)
fixed lock ring thread:
Axle: aluminum axle bolt-onEccentric for vertical drops
Bearings: two: 6902-2rs
O.L.D.: 126mm, 130mm, 135mm *disc only available in 135mm
Weight:
- 332 grams (135mm spacing non disc)
- 388 grams (135mm spacing disc)
Finish: polished silver or black anodized
Spoke Hole Drilling: 28h, 32h, 36h
US MSRP Silver: $190 Black: $195 (Ecc ENO) Eccentric ENO stock as a flip/flop - freewheel only shell upon request
US MSRP Silver: $211 Black: $216 (Disc Ecc ENO) use with Eccentric Caliper Mount
ENO FRONT
Wheel Building Specification
Center to Flange: 29.75mm
Flange Diameter: 38.5mm
O.L.D.: 100mm
Standard / Ecc ENO
Wheel Building Specification
Center to Flange (left & Right) 32.5mm
Flange Diameter: 48mm
OLD: 126mm, 130mm or 135mm
Standard/Ecc DISC ENO
Wheel Building Specification
Center to Flange (left & right): 32mm
Flange Diameter: 60mm
OLD: 135mm