T11 Front
$176.00 – $201.00Price range: $176.00 through $201.00
As with all our hubs, the T11 hub draws on over 30 years worth of hub manufacturing experience and real world testing, going back to the “Ti Front hub” we introduced in 1992. We’ve been doing this for a long time, and every White Industries hub we make has that original DNA in it; simple, durable, dependable.
Product Details
As with all our hubs, the T11 hub draws on over 30 years worth of hub manufacturing experience and real world testing, going back to the “Ti Front hub” we introduced in 1992. We’ve been doing this for a long time, and every White Industries hub we make has that original DNA in it; simple, durable, dependable.
T11’s are perfect for road and gravel bikes with rim brakes because of their low weight and clean, minimalist look. They rotate on two Enduro brand bearings, and are made here in our Petaluma, CA shop. They are available in six spoke drillings and seven colors.
What’s In The Box
- Complete front T11 hub
- Does not include QR skewer
Specs
- Hub shell is made from 6061-T6 aluminum
- Colors: black, blue, gold, pink, polished silver (not anodized), purple, red
- Finish: polished, then anodized, with machine-engraved logos
- Enduro sealed radial carbon steel bearings standard
- Enduro XD-15 Ceramic bearing upgrade available
- Adjustable bearing preload
- Easily serviceable and rebuildable
- Weight: 92g
- Spoke drillings: 16, 18, 20, 24, 28, 32
- Axle options: 9mm x 100mm QR
-
Wheel Building Specs:
| Spoke Hole Diameter |
Left Flange Diameter |
Right Flange Diameter |
Center to Left Flange |
Center to Right Flange |
| 2.3mm |
35mm |
35mm |
35.8mm |
35.8mm |
-
- Hub Shell: 2x Enduro ABEC 5 61901-LLU/LLB bearings
Compatibility
- Rim brakes only
- Axle options: 9mm x 100mm QR
- Not compatible with radial spoke lacing
- This depends on the type of climate you’re riding in, and how often. To check the bearings, remove the wheel once a month and spin the axle with your fingers to check for roughness which would indicate a bearing/bearings need to be replaced. In wet climates you can smear extra grease on the faces of the outer bearings to help protect them. For this, we like to use Sta-Lube Water-Resistant Marine Grease.
- Use “Mothers Mag and Aluminum Polish” with a microfiber rag. Start with heavy pressure and lighten up towards the end.
- Unfortunately we do not offer those options.
