Information
These hubsets are anodized together so the colors are perfectly matched. Idividual hubs are available on the “XMR Front” or “XMR Rear” pages. Our XMR (Cross/Mountain/Road) hubs are designed around the ISO 6-bolt rotor mounting interface as opposed to the Center Lock mounting standard used on our CLD hub. The 6-bolt system requires a slightly larger flange diameter which allows for a classic look with machined “windows” in the flanges. From road bikes to trail bikes, the XMR is a solid choice for 6-bolt set ups. Made in our shop from U.S. sourced 6061-T6 aluminum, they’re available in a range of drillings, colors, and axle configurations.
A question we always get about our disc hubs is, “CLD or XMR? Which is better?”. Neither is “better” than the other. Both share the same internals and the differences really come down to the respective designs having to accommodate the two different rotor mounting interfaces. Bottom line is you really can’t go wrong with either hub!
Features
- U.S. made 6061-T6 aluminum
- Enduro bearings
- 6/4 titanium driver
- 3-pawl, 48 point (7.5 degree) engagement
- Compatible with 6-bolt rotors
- Not compatible with Campy N3W/EKAR drivers
- The driver will fit the hub but the cassette will hit the spokes
- Cassette spacer included only on XDR freehub bodies
- Available separately for Shimano HG11 (part# SPACER11)
Specs
- 175g front/256g rear
- Drillings: 24/24, 24/28, 28/28, 28/32, 32/32, 32/36, 36/36
- Axles:
- Front
- 15mm x 100mm Thru (works with removable QR plugs)
- 12mm x 100mm Thru
- 9mm x 100mm QR (plugs remove to convert to 15 Thru)
- Rear
- 12mm x 142mm Thru
- 10mm x 135mm QR
- Front
Bearings
- All Enduro ABEC 5 except 3802W (ABEC 3)
- Front:
- Two Enduro ABEC 5 17287-2rs bearings
- Rear
Driver Style |
Left hub shell bearing | Right hub shell bearing | Inner driver bearing |
Outer driver bearing |
Shimano Hyperglide 11 speed |
61902-SRS | 61902-SRS | 3802W LLB |
61902-SRS |
Shimano Micro Spline |
61902-SRS | 61902-SRS | 3802W LLB |
61902-SRS |
SRAM XDR |
61902-SRS | 61902-SRS | 3802W LLB |
61902-SRS |
Campy 11 speed |
61902-SRS | 61902-SRS | 3802W LLB |
3802W LLB |
Wheelbuilding specs
- Spoke hole diameter
- 2.6mm
- Front:
Left flange diameter |
Right flange diameter | Center to left flange |
Center to right flange |
60mm |
60mm | 23mm |
33.5mm |
- Rear:
Left flange diameter |
Right flange diameter | Center to left flange |
Center to right flange |
60mm |
60mm | 33mm |
19.5mm |
Technical Documents
- Front Hub Assembly
- Rear Hub Assembly
- Ratchet Ring and Pawl Identification
- Ratchet Ring Removal and Installation
- Freehub Body Identification Guide