Rear Axle Kits

• White Industries axle kits and parts are only compatible with White Industries hubs

Rear axle kits

• Boost axle kits are not compatible with non-Boost hubs and vice versa
  • There are aftermarket kits that will convert 12mm x 142mm Thru axle to 12mm x 148mm Boost
    • We do not make these kits
    • We don’t know how well they work
    • They will void our warranty
• Rear hubs with our Shimano Micro Spline drivers require different axle kit than other drivers
  • If you are swapping to a Micro Spline driver, you will need to purchase the correct axle kit for the new driver
    • Those are listed with “(Micro Spline Driver)” at the end
  • If you are swapping from a Micro Spline driver to any of the other styles, you will need to purchase the correct axle kit for the new driver
    • Those are listed with “(non Micro Spline Driver)” at the end

Mi5 rear hubs

• There were 2 versions of  these hubs, each with different hub shells
  • The way to figure out which one you have is by identifying which freehub body you have:
    • Check out the Freehub Body Identification Guide
• Older Mi5 “10 speed” hubs use Shimano HG 10 speed, SRAM XD (not XDR), or Campy 10 speed drivers
  • When ordering an axle for these hubs make sure you choose the Mi6/Mi5 “10 speed” option
• Newer/current Mi5 hubs use Shimano HG 8-12 speed, Shimano Micro Spline, SRAM XDR, or Campy 9-12 speed drivers
  • When ordering an axle for these hubs make sure you choose the Mi5 “11 speed” option

H3 rear hubs

• When converting from the original Shimano HG 8-10 speed driver to newer Shimano HG 8-12 or SRAM XD/XDR driver
  • You will need to purchase with a new axle kit (Part# KITR13011 for the T11 hub)
  • You will have to re-dish your wheel slightly (2-3mm to the right)