Information
These hubsets are anodized together so the colors are perfectly matched. Idividual hubs are available on the “CLD+ Front” or “CLD+ Rear” pages. Our CLD+ (Center Lock Disc Boost) hubs are designed around the Center Lock splined rotor mounting interface as opposed to the 6-bolt mounting standard used on our XMR hub. The Boost spacing allows for wider hub flange spacing which results in better spoke bracing angles. Made in our shop from U.S. sourced 6061-T6 aluminum, they’re available in a range of drillings and colors.
A question we always get about our disc hubs is, “CLD or XMR? Which is better?”. Neither is “better” than the other. Both share the same internals and the differences really come down to the respective designs having to accommodate the two different rotor mounting interfaces. Bottom line is you really can’t go wrong with either hub!
Features
- U.S. made 6061-T6 aluminum
- Enduro bearings
- 6/4 titanium driver
- 3-pawl, 48 point (7.5 degree) engagement
- Compatible with Center Lock style rotors
- Rotor lockrings not included
- Rotor lockring compatibility
- Front
- Internally splined lockring such as Shimano SM-RT81
- Externally splined lockring such as Shimano SM-HB20 or HB-M8010
- Rear
- Internally splined lockring such as Shimano SM-RT81
- Front
- Cassette spacer included only on XDR freehub bodies
- Available separately for Shimano HG11 (part# SPACER11)
Specs
- 183g front/294g rear
- Drillings: 28/28, 32/32, 36/36
- Axles:
-
- 15mm x 110mm Thru front
-
- 12mm x 148mm Thru rear
Bearings
- All Enduro ABEC 5 except 3802W (ABEC 3)
-
- Front:
- Two Enduro ABEC 5 17287-2rs bearings
- Rear:
- Front:
Driver Style | Left hub shell bearing | Right hub shell bearing | Inner driver bearing | Outer driver bearing |
Shimano Hyperglide 11 speed |
61902-SRS | 61902-SRS | 3802W LLB |
61902-SRS |
Shimano Micro Spline |
61902-SRS | 61902-SRS | 3802W LLB |
61902-SRS |
SRAM XDR |
61902-SRS | 61902-SRS | 3802W LLB |
61902-SRS |
Campy 11 speed |
61902-SRS | 61902-SRS | 3802W LLB |
3802W LLB |
Wheelbuilding Specs
- Spoke hole diameter
- 2.6mm
- Front:
Left flange diameter |
Right flange diameter | Center to left flange |
Center to right flange |
60mm |
60mm | 25.75mm | 38.5mm |
- Rear:
Left flange diameter |
Right flange diameter | Center to left flange |
Center to right flange |
60mm |
60mm | 36.5mm | 22.5mm |
Technical Documents
- Front Hub Assembly
- Rear Hub Assembly
- Ratchet Ring and Pawl Identification
- Ratchet Ring Removal and Installation
- Freehub Body Identification Guide